To minimize waste and our environmental footprint, we've chosen to print all your orders on demand and according to the exact measurements of the surfaces to be covered. It's therefore important to take accurate measurements. Don't worry, it's much simpler than you think!
01
Walls
Simply provide us with the following measurements, namely the maximum width and height of your surface to be covered: wall; furniture, door, window, shower, mirror, etc.
For walls, it is important to exclude moldings and baseboards but to include doors and windows located on the wall to be covered.
Whether your wall has a slope in one or two corners, always calculate the maximum width and height as if your wall were rectangular.
Backsplashes
Simply provide us with the following two (2) measurements: the maximum width and height of your surface to be covered.
We will cut your panels to the correct size to facilitate your installation.
02
Use a measuring tape and be as precise as possible by rounding up to the nearest inch.
Please note that we will add an extra 2 inches to your measurements in both width and height to facilitate installation.
Any excess can be easily trimmed with an X-Acto knife after the product has been fully applied for a flawless finish.
03
Enter your final measurements (without extra) in the appropriate space on the product page you have selected.
The calculation tool will then automatically add the excess to your measurements to ensure complete coverage of the surface.
If you do not wish to add any extra dimensions to your measurements, simply check the corresponding box. We will then print your measurements exactly as entered in the width and height fields.
Do you have any questions?
Contact us easily. We will be happy to answer all your questions.
Via Facebook chat
Visit our Facebook page or use the chat at the bottom of the page.
By phone
