Required materials
Clean, damp cloth
Painter's tape
Scissors
Suitable surfaces
Smooth, dry and clean surface, covered with a primer and one or two coats of paint.
Please wait a minimum of 15 days before installing on a freshly painted surface.
Surfaces to avoid
Dirty, moldy or dusty surface
Textured, damaged or peeling surface
*It is not recommended to install directly onto brick, wood, gypsum, primer or plaster
No transfer paper
Watch our installation video
Watch the video
1. Prepare the surface
Clean the surface with a cloth
Lightly dampen and allow to dry. Do not use cleaning products.
2. Apply
Peel off each piece and apply them to the wall to achieve the desired result.
With transfer paper
Watch our installation video
Watch the video
1. Prepare the surface
Clean the surface with a cloth
Lightly dampen and allow to dry. Do not use cleaning products.
2. Cut
On the sheet containing all the designs, cut out each individually sticker.
3. Take off
Carefully peel off the white backing, making sure the sticker remains firmly attached to the transfer paper. The adhesive side is now exposed.
4. Apply
Apply the adhesive side of the sticker directly to the wall. Press and smooth firmly with your hands (the warmth of your hands will activate the adhesive).
5. Remove
Slowly remove the transfer paper, making sure that the sticker remains firmly stuck to the wall.
6. Finishing
If bubbles have formed, move them outwards with your fingers by pressing lightly.


